High Air Flow Rate Box HEPA Filter for Industrial HVAC System

Air Pressure drop and air flow rate data Sheet:

Pressure drop range: ±15%

According to clients` requirements offer different specifications

The installation for High Air Flow Box HEPA filter

1. Air filters should be installed in normal temperature, normal pressure and normal humidity environment; If the conditions are not well, that will influence performance of HEPA filters.
2. Before installation, please check if the air filters is deformed or broken; please check the filter media if it`s complete without any broken;
3. Pay attention to the gasket make sure air filters and install frame is air tight;
4. Clean the HVAC system tunnel make sure no rust, dust and other fine particles;
5. Make sure the air flow direction are same between HVAC tunnel and air filters;
6. Don`t hold the filter media, please hold the filter frame when install the filters;

The application for high air flow Box HEPA filters;

1. High airflow required HVAC system terminal filtration;
2. Replacement for HEPA filter with separators;
3. Variable airflow system;
4. High moist ventilation system that pocket filters cannot be used;
5. Commercial buildings HVAC system such as hospital, school, library, airport and so on;
6. Terminal HEPA filter for cleanrooms in LED, micron electrical, pharmaceutical, food processing, optical, painting, medicine manufacturing and so on;

Description

Filter media: glass fiber. ( HV company )

Frame: gal steel

Efficiency: H10, H11, H12, H13, H14 ( EN: 1822 )

Usage environment: highest temp 80, humidity 80%

Initial pressure drop:

Recommend final pressure drop: 600Pa

Separator: hot-melt glue

Gasket: EVA Neoprene

Sealant: polyurethane

Face guard: painted metal mesh ( if required )

Applications: final filter for clean room air ventilation system, pharmaceuticals, laboratory, hospital, electronic industry and so on.